28 septiembre 2011

Sweet Gothic Sixteen


Supplies Needed: 
PSP 
Tube of choice. I am using one by Irmino Pin Oops! from SATC. You can purchase the tube: here 
Scrap kit Sweet Sixteen (PTU) by: Kirstys Scraps. You can purchase it here
Mask by Sabine from Creative Misfits here
Plugin Xero (Radiance) here
Font here

Open a new image: 600x600
Open the paper: KISM-Sweet16-Paper7.
Copy - Paste, as a new layer. 
Layers - Load mask: MakeAMaskRock2MF03Slow2010 - Merge group.
Image - Mirror. Duplicate and apply: Image - Mirror again. Move it a little to the left.
Open: KISM-Sweet16-Ribbon7.Copy - Paste, as a new layer. Resize at: 60 percent (Smart Size)
Move it a little to the left. With your magic wand click inside of the ribbon. 
Selections - Modify - Expand: 5.
Open: KISM-Sweet16-Paper5. Copy - Paste, as a new layer. Resize at: 70 percent (Smart Size)
Move the layer below the ribbon. Selections - Invert. Edit - Clear. Deselect.
Activate the ribbon layer.
Open the tube. Copy - Paste, as a new layer. Resize at: 80 percent (Smart Size)
Select your magic wand:

make a little selection in the border to remove the excess of the tube. 

Edit - Clear.

Open: KISM-Sweet16-GlitterStrip. Copy - Paste, as a new layer. 
Move it to the left. Duplicate. Image - Mirror. Image - Flip. Move it to the right.
Activate the Selection tool and remove the excess from the layers:

Duplicate the tube layer and apply: 
Effects - Plugins - Xero - Radiance:

Change the opacity to: 65 percent
Now finish decorating with the elements of your choice. 
you have lots to choose from this kit!
Apply sharpen (Adjust - Sharpness - Sharpen) to the elements and the original tube and apply drop shadow
for the elements:
V: -1
H: 2
O: 50
B: 5

for the ribbon:
V: 2
H: 3
O: 45
B: 7

for the tube:
V: -2
H: 2
O: 45
B: 8

Add your name and copyright. If you want a non animate tag, save now as jpg or png.
To animate:
Activate the ribbon layer. Select your magic wand:

Start to click in the pink parts (hold the shift key in your keyboard) 
until you select all the parts you want.

Duplicate the layer 2 times. Hide the duplicates by clicking in the "eye" Visibility toggle.
Activate the original layer.
Adjust - Add/Remove Noise - Add Noise:
Uniform
30%
Monochrome
Now activate the first copy (but don't click in the eye).
Apply Noise again but change the percent to: 38
and for the last copy apply Noise and change the percent to: 34
Deselect. Copy Merged. Open Animation Shop. Paste as a new animation.
Back to psp. Open (click in the eye) the first copy. 
Again copy merged and Paste After current frame. Repeat the steps for the last layer.
If you like it save as gif.
You're done!

17 septiembre 2011

Goth Candy Blue



Supplies Needed: 
PSP 
Tube of choice. I am using one by Irmino Pin Oops!, from SATC. You can purchase the tube: here Scrap Ms.Bunny (FTU) by: Cora's Creations here
Mask 218 by: Weescotslass  here
Font here

Open a new image: 600x600
Flood fill with white. Add a new layer Flood fill with a color from your tube, I choosed: #131f32
Layers - Load mask: WSL_Mask218 (as is) - Merge group.
Copy - Paste as a new layer. Delete the original.
Open: cc-frame-06. Copy - Paste as new layer. Duplicate.
To the original: Resize at 57 percent.
The duplicate layer: Resize at 41 percent. 
Open: cc-frame-05. Copy - Paste as new layer. Duplicate.
To the original: Resize at 50 percent.
The duplicate layer: Resize at 35 percent. Arrange this way:

With the magic wand click inside of the left frame. Selections - Modify - Expand: 3.
Open: cc-pp-04. Copy - Paste. Selections - Invert. Edit - Clear. Selections - Invert.
Open your tube. Copy - Paste as a new layer. Move it under the left frame. 
Selections - Invert. Edit - Clear. Deselect. Move this layer under the frame. 
Do the same with the other frame but colorize the paper to black and white.
Change the blend mode of the left tube to: hard light 
Change the blend mode of the right tube to: luminance (Legacy). Opacity 75 percent.
Add all the elements you want for decorate your tag. Copy - Paste the tube as a new layer. 
Resize if needed. 
apply drop shadow:
V: 0 H: 2
O: 50 B: 4
Add your name and copyright info.
Remove the excess with your the crop tool. If you want a non animate tag, save now as jpg or png.
To animate:
Close all the layers, except the back, mask, elements (if you added some in the back) and the right frame flower. Edit - Copy Merged.
Open Animation Shop. Paste as a new animation. Duplicate until you have 9 frames.
Back to psp. Close all the layer and only open (click in the eye, in your layer palette) the left flower frame. Copy and  paste as a new animation.
Effects - Insert Image Effects - Rotate and apply.

Now activate the frame flower animated, select all the frame and drag them to your tag. 
Back to psp. Close the left flowe frame and open the rest of the elements, tubes, name and copyright. Copy Merged, go to animation shop and paste as a new animation. Again duplicate until you have 9 frames and drag them to the first animation to finish your tag.
Press: Alt + Enter to change the speed to 15. If you like it save as gif.
You're done!

12 septiembre 2011

Show Off

The set was made by Christina from Tragedy's Creationz
Love your result it's fabulous. Go and check her blog, she have lots of awesome tutorials.





11 septiembre 2011

Angel in Pink

Supplies Needed: 
PSP 
Tube of choice. I am using one by Barbara Jensen Exclusive to Scraps and the City, you can purchase the tube: here
Scrap kit Goth This (FTU) by: Jo "A Taggers Scrap" here
Mask 15 by: Vix  here
Plugin Eyecandy 3 here
Font here

Open a new image: 650x650
Floodfill with white.
Open: paper3. Copy - Paste, as a new layer. 
Layers - Load mask: Vix_Mask15 - Merge group. Image - Mirror.
Open: mesh. Copy - Paste, as a new layer.
Apply Drop Shadow:
V: 2 H: 1
O: 35 B: 3
Layers - Merge - Merge Visible.

Open: frame4. Copy - Paste, as a new layer. Resize at 85 - Smart Size.
Image - Free Rotate:  15% left
Image - Mirror. With the Freehand Selection Tool:
Select a part of the frame. Edit - Clear.

In your layer palette close the merged layer. 
Select the frame. Layers - Merge - Merge Visible.
With the magic wand click inside of both frame. Selections - Modify - Expand: 5
Open: paper6. Copy - Paste, as a new layer. Move it below the frames.
Selections - Invert. Edit - Clear. Deselect.

Copy and paste your tube as a new layer. Resize if neeeded. Move it to the center.
Apply drop shadow:
V: 3 H: 2
O: 60 B: 8

Now add all the elements you want to finish your tag.
Close all the layers except the ones with the elements.
Layers - Merge - Merge Visible and apply drop shadow:
V: 2 H: 1
O: 50 B: 5

Add your name and copyright. If you want a non animate tag, save now as jpg or png.
To animate:
Activate the paper layer. Select the Freehand Selection Tool - feather: 4
Make to selections in the oposites corner of the frames.

Duplicate the paper layer two more times. 
Close those layers clicking in the "eye" Visibility toggle.
Select the original paper layer.
Effects - Plugins - Eyecandy 3 - HSB Noise:

Now activate the first copy (but don't click in the eye), 
apply HSB Noise but change the random seed to: 30 
and for the last copy apply HSB Noise with random seed of: 60.
Deselect. Copy Merged. Open Animation Shop. Paste as a new animation.
Back to psp. Open (click in the eye) the first copy. 
Again copy merged and Paste After current frame. Repeat the steps for the last layer.
Press: Alt + Enter to change the speed to 13. If you like it save as gif.
You're done!